HobbyEagle - HobbyEagle Electronic Technology Co., Ltd.

Notice for the faulty accessories of A3 Super 3　2021-11-29

New Firmware V2.7 Released NEW

Date: 2022-01-15

Download the newest integrated software A3 Configurator to complete the update.

Show What's New

Change the decision condition of rx signal lost, the gyro will enter rx timeout state only when there are no input signals detected on all three channels of Aileron, Elevator and Rudder.
Change the effective pulse width range of PWM input capture channels to 500-2500uS, the gyro will ignore the inputs and the servos will hold their last positions if the signals exceed the limits.
Change the PWM pulse width limit to 800-2220uS for all output channels.

Release Notes Learn More about A3 Configurator Firmware Update Guide

FEATURES USER MANUALS SOFTWARE BOX CONTENT & ACCESSORIES SPECIFICATIONS APP

The A3 Super 3 is a high-performance and functional 6-axis gyro and stabilizer designed for R/C airplanes. This gyro can be used with nearly any size and type of R/C airplanes and it will make the flying even easier and comfortable.

32-bit MCU, high-precision 6-axis MEMS sensor, improved hardware platform and new firmware solution provide more reliable performance.
7 flight modes, including Gyro-Off mode, Normal mode, Trainer mode, Atti-Lock mode, Auto-Level mode, Auto-Hover mode and User-Defined mode.
6-position flight mode switching supported.
Compatible with most standard receivers, standard PPM single-line receivers and Futaba's S.Bus and S.Bus 2 receivers.
7 wing types, dual aileron, dual elevator, delta-wing and v-tail supported.
External LED module, integrated with data interface, flat or upright various mounting orientations supported.
Servo center position and travel limits adjustment supported.
Pass-through function for [A2] and [E2] channels.
Programming card and mobile APP control supported (The programming card and Wi-Fi module are not included in a standard edition).

External LED Module

An external LED module is added to make the gyro even easier and more convenient to install and use.

Trainer Mode

Trainer Mode is added. When flying in this mode, you can only tilt the plane to a certain angle by giving aileron or elevator stick input. Roll and loop are not allowed in this mode, the plane will be stabilized all the time. This prevents the plane from being tilted into a larger angle that may cause a danger. This mode can be used as emergency rescue, or in other applications, e.g. to have a training for new beginners or to use for FPV.

6-position Mode Switching

This new feature allows you to switch the flight mode among all modes supported during flight, by using a mixing of a 2-position and 3-position toggle switch on your transmitter. View programmming examples for 6-position switch »

Pass-through Channels

Pass-through function is available for [A2] and [E2] channels. When the second aileron or elevator channel is unused, the input signal applied to [A2] or [E2] will directly be passed to the output [OUT4] or [OUT5]. With this feature, the [A2] and [E2] can be used as any other purpose as you need, e.g. throttle, gear or flap, etc.